Biostar

This problem was caused by the DMI data not update properly when update to new BIOS.

Please follow the instruction to update DMI area for system for boot-up properly.

1. Go to CMOS Integrate Flashing Program and choose the BIOS file.

2. Press "Tab" key to go to Update DMI data.

3. Press "Page Down" key to select Yes for Update DMI data.

4. Press "Tab" key again to go back to BIOS file selection area, then press "Enter" key to update the BIOS. Follow the instruction on screen to finish the BIOS update procedure.

5. Reboot the system and it will update the DMI date after POST screen.

New ATI VGA driver does not contain Microsoft .NET Framework.

So system will show warning message when log to Windows start up screen.

When see the warning message on Windows screen, please download the .NET Framework from following links.

Microsoft .NET Framework Version 2.0 Redistributable Package Windows XP (x86)
http://www.microsoft.com/downloads/details.aspx?FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en

Microsoft .NET Framework Version 2.0 Redistributable Package Windows XP 64 bit (x64)
http://www.microsoft.com/downloads/details.aspx?familyid=B44A0000-ACF8-4FA1-AFFB-40E78D788B00&displaylang=en

Download link for Windows BIOS update utility:

https://download.biostar.com.tw/upload/Driver//Software/T_Software/T_BIOS_Update_1948.zip

How to update BIOS in Windows system:

http://www.biostar.com.tw/app/en/manual/bios_update.pdf

Please refer the following pictures for memory slot configuration on TPower X58.

Orange slots will be primary channel for this motherboard.

If install only one module, please insert to first orange color slot (DDR3_A2).

For single channel memory support with two modules. (One orange slot and one white slot)

For dual channel memory support with two modules. (Two orange slots)

Three channel memory support with three modules. (Three orange slots)

If you overclock the motherboard FSB or memory setting too much, it might cause system BIOS stop working.
You can refer user manual to clear CMOS to make system boot up again with default BIOS setting.
Or you might try to remove all components and power cable from system.
It could help system boot up properly again.

Please double check the CPU support list for 45 nm CPU support.

Also this information can be find on motherboard Spec list.

Biostar motherboard with AM2+ socket models will be able to support AMD Phenom AM2+ CPU.

1. Please update MB BIOS to the latest version while using AMD AM2+ CPUs.
2. Due to the latest AMD CPU transition, you may encounter the situation that the new system failed to boot while using new AMD AM2+ CPUs.In this case, please install one standard AM2 CPU to boot your system, and update the latest BIOS from our website for AMD AM2+ CPUs complete support.

3. See CPU support list for highest speed Phenom CPU supported on each board.

http://www.biostar.com.tw/app/en/event/IntelAMDAM2/AMDAM2.html

Please refer the following web link for motherboard to support AM3 (45 nm) CPU.

http://www.biostar.com.tw/app/en/event/IntelAMDAM2/AMDAM3.php

Notes :
1. Please update MB BIOS to the latest version while using AMD AM3 CPUs.
2. Due to the latest AMD CPU transition, you may encounter the situation that the new system failed to boot while using new AMD AM3 CPUs. In this case, please install one standard AM2+ CPU to boot your system, and update the latest BIOS from our website for AMD AM3 CPUs complete support.

Please update the latest audio driver from our website to fix this problem.

Here are the download links for Hi-Fi models.

For Hi-Fi Z77X

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=608&tab=3

For Hi-Fi H77S

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=609&tab=3