Biostar

If your system does not have screen output after over-clock. This might be caused by the CPU!|s Front-Side -Bus (FSB) over the chipset!|s limitation. You can restore the BIOS default setting by clear the CMOS setting. Once the CMOS goes back to default setting, the System will able to boot-up properly. Following show the procedure how to Clear the CMOS Setting: 1. Turn off the system and remove AC power cord from the power supply. 2. Set JCMOS1 to Pin 2-3. 3. Wait for 10 seconds. 4. Set JCMOS1 back to Pin 1-2. 5. Connect AC power cord back to power supply and power on the system.