Biostar

Please follow below Instruction to install the USB Card Reader driver

1. Insert the CD Driver Into the CDROM
2. Access the CDROM content
3. Select DRIVER/CARD_READER
4. Double Click the Setup.exe file to start the Installation process.
5. Follow the instruction to finish the installation procedure.

Please refer the Warpspeeder support description as following link. The U8788 board unable to support OverVoltage function, because the major chipset limitation.
-> https://www.biostar.com.tw/products/mainboard/socket_478/u8788/

Biostar have updated the entire necessary driver for all devices used on M6TWX series and M7VKX series motherboards. With the latest released updated driver, M6TWX and M7VKX series motherboards are able to support Windows XP system.

The function just able worked under windows 98/98Se/ME, but it unable to work under windows XP/2000/NT and DOS environemnt.
This is because both of windows 98 and windows ME are using polling way to check the CPU's Temperature per 6 seconds. But, these perating system as windows 2000 & NT & XP are using a Event action to check it.

Yes. M7VKH can support AMD Morgen and Palamino series CPU. However you need to update the BIOS to VKH0528F .

So far, M7VKB motherboard had designed on two different types, with and without CPU Temperature's sensor. Please refer to following descriptions:

• Version 1.0 & Version 1.1: These two version motherboards had the CPU Temperature's Sensor.
• Version 2.0 & Version 2.1: These two version motherboards had no CPU Temperature's Sensor.

M7VIB Is designed for both Register DDR and Un-buffer DDR memory. The different between Register and Un-buffer memory Is, the Register memory able to control the CAS and RAS timing. This Is because the Register memory has a built-in controller. If the system detects a controller on the DIMM, the memory driving timing will be controlled by the memory itself. As per Un-buffer memory, the system will control the memory timing.

The problem Is caused by the Memory compatibility Issues. The problem can be resolved by update the BIOS to VIB0726F.

The problem Is caused by the Chipset coding error. Updating a new BIOS of MIA0517F, will solve the problem.

M7TDX series motherboard use Intel 845 Chipset as MCH (Memory Controller Hub). Based on Intel 845 Chipset specification, 845 Chipset only able to support AGP 4X mode. The main different between AGP 1X, 2X, and 4X is the VGA operating voltage. AGP 4X Is using 1.5V and AGP2X/1X are using 3.3V. The 845 chipset will be damaged If AGP2X VGA card Is used. Biostar have added a protection circuit to prevent the MCH to be burned out when installing an AGP .