Biostar

Intel Core i7 Processor CPU has 4 physical cores, instead of 8 cores.

Due to Intel HT (Hyper-Threading Technology), it can Multi-threading.
when [Enabled] Intel HT Technology in BIOS (Default Value),
Enter into OS, can see processor thread running with [8 cores].

If [Disabled] Intel HT Technology in BIOS manually.
Enter into OS, can see processor thread running with [4 cores].

1. Prepare RAID Drivers
Before create Raid, preparing a formatted floppy disk with essential Raid driver is necessary.
All drivers you can get from Biostar Driver CD.
Under Windows,
Clicking “My Computer”, click right button on DVD-Rom and click “Open”
If your DVD-Rom device is E
For Win XP, the path is E:\Driver\Chipset\ATI\SB600_RAID_F6\XP
For Win Vista 32 bits, the path is E:\Driver\Chipset\ATI\SB600_RAID_F6\VISTA\x86
For Win Vista 64 bits, the path is E:\Driver\Chipset\ATI\SB600_RAID_F6\VISTA\x64
For Win 2003, the path is E:\Driver\Chipset\ATI\SB600_RAID_F6\2003
Each folder above, you can find “copytoa” execute file. Under windows, inserting a formatted disk, and click “copytoa”, it will copy all RAID drivers to the floppy disk.

2. Procedures during Win XP installation
When seeing the message below on the screen, be sure press “F6” for loading RAID drivers

Waiting for a while, until seeing the screen below

Insert the RAID Floppy Driver Disk before press “S” to load RAID Drivers
Install Win XP Home or Professional Edition, Choose “ATI AHCI Compatible RAID Controller-x86 platform”
Install Win XP 64bits Edition, Choose “ATI AHCI Compatible RAID Controller-x64 platform”

All drivers have been loaded after seeing the screen below.
Press Enter to continue
The following procedures are the same as normal Win XP installation

3. Procedures during Win Vista installation
Insert a storage device with the Vista RAID drivers
When seeing the screen below, click “Load Driver”

Press “OK”

Point out the storage device, and see the drivers on the list
Press “Next” to load the drivers

After loading the RAID driver, the array can be seen on the list
The following procedures are normal Win Vista installation.

1. Press Delete key to go to CMOS. Select Integrated Peripherals > South OnChip PCI device > OnChip SATA Type > RAID.

After the BIOS setting, Save and exit the BIOS.

Most of DDR2 1066 memory need to over-voltage and set the memory timing in BIOS.

Please follow procedure for proper memory settings.

(1)Check your memory volage.
--> Every different memory has different original voltage value demand,please check your memory first.
For example:
This memory demand volatge is 2.2V~2.4V

(2)Set your memory voltage in BIOS.
CMOS / T-Series / OverClock Navigator [Manual OverClock] / Voltage Configuration / Memory Over Voltage [Please set the memory demand voltage].
--> For example,this memory voltage follow its demand to set it to 2.2V~2.4V

(3)Set memory clock in BIOS.
CMOS / T-Series / OverClock Navigator [Manual OverClock] / DRAM Timing Configuration / Memory Clock Mode [Manual] / Memclock Value [Please set to DDR2-1066]

(4)BIOS [Save Changes & Exit]
Memory clock will run DDR2-1066 speed.

POST screen can verify the DDR2 speed.

Please install all the driver from driver CD in the motherboard package.

It will make the devices work properly in Windows system.

If you can not find the driver CD, you can download the driver form this link.

https://www.biostar.com.tw/app/en-us/mb/driver.php?S_ID=363

1. For the Award BIOS, it will detect floppy disk while system boot up.

If there is no floppy disk on the system, it will show warning message in POST screen.

You can press Delete key in POST screen, then go to CMOS> Standard CMOS Features> Drive A> set to None.

Save the setting for CMOS or press F10 to save it.

After system reboot, the warning message will cleared.

2. CMOS checksum error might show up when first time install CPU or clear system CMOS.

Please press Delete key to go to CMOS, then load optimized default setting for the BIOS and press F10 to save the setting.

After system reboot, the warning message will cleared.

Motherboard with 2Mb BIOS EPROM will be able to support large capacity hard disks.

However, not all the motherboard will be able to support SATA2 hard disks.

Please refer the user manual or manufacture's website for the hard drive's jumper setting to make hard disk support SATA1 mode. Then motherboard will be able to detect it properly.

Please refer the ATI's list of VGA card model which can support Hybrid CrossfireX.

HD4350 is not the Hybrid CrossfireX supported model.

However, it will be able to support CrossfireX by using two HD4350 VGA cards.

Normally, motherboard BIOS will detect VGA card and disable on-board VGA automatically.

However, you can still manually disable it in BIOS.

1. Press Delete key in POST screen to go to CMOS

2. Go to Chipset> Internal Graphics Ocnnfiguration> Internal Graphics Mode> Disable

3. Save and exit the CMOS setting

It will disable on-board graphic for the motherboard after restart.

This noise is the echo sound from speaker to microphone.

Open the Realtek audio utility then disable the Mic echo in the Microphone setting.

Please refer attached picture for detail.