Back

Home
Support
FAQ

FAQ

You can easily access our extensive FAQ section, which is designed to swiftly address common queries and promptly resolve any issues you might encounter.

All HOT 20

Questions

How do I install OS in UEFI mode?

<Step1> BIOS setup:
Please go to CMOS by press "Delete" key in POST screen. Choose Boot > UEFI Boot > set it to [Enabled].

Then Save and exit the BIOS.

<Step2> Reboot the system and Press [F9] key in POST screen, To select Boot Device:
Select [UEFI] as boot device.
Note: UEFI mode only support Windows 7 64bit or Windows Vista 64bit OS.

<Step3>
Install Windows 7 64bit or Vista 64bit OS in standard way.

<Step4>

If use Intel H67 chipset model (VGA on-board),
it need to install Microsoft Hotfix before install on-board VGA driver.
Microsoft Hotfix (No#979903) download link http://support.microsoft.com/kb/979903

How to use BIOScreen utility to use custom logo?

1. Find BIOScreen in Start menu.

2. Default BIOScreen page. Click Load image for input custom logo.

3. Choose LOGO.JPG file and utility will show preview on right side. Then click Open.

4.After load the LOGO.JPG, click Transform button and wait for a moment for BIOS file transfer.

5.Once Transform finish, it will pop out the notice window. Click OK.

6.Click Update Bios button to update the BIOS with custom logo.

7. Utility will pop out a notice window. Click OK to update BIOS with custom logo.

It will take a while for system to update BIOS. Do not turn off power or run other programs.

System will auto restart after BIOS update finish.

You will be able to see the custom logo on POST screen.

Note: If showing No Support Current BIOS message after running the BIOSCREEN utility, please update the latest version BIOS from website download area for your model.

Why my TPower X58 motherboard will show "Board and CPU does not supportNX security feature" when install Windows 8?

Please double check BIOS function "Execute-Disable Bit Capability" is Enable. If this function is disabled, then it might appear to have the error message during Windows 8 installation.

Will my AM3+ motherboard support latest AMD Vishera core CPU?

Yes, our AM3+ motherboard will be able to support AMD Vishera core CPU. Please update with latest BIOS from the download page for best CPU compatiblity.

How to set up AMD Dual Graphic (Hybrid Crossfire) on Hi-Fi A85W motherboard?

Here is the instuction for setting AMD Dual Graphic (Hybrid Crossfire) on Hi-Fi A85W.

CPU: A10 5800K / VGA card: HD 6670

Note: It will require 2G+2G or 4G+4G memory module in Dual Channel setting.for AMD Dual Graphics.

1. Insert PCI-E VGA card on motherboard then plug monitor to VGA card.

2. Boot up system and go to BIOS> Chipset>North Bridge > GFX Configuration.

Set Surround View [Enable].

Press [F4] key to save BIOS setting and reboot system.

3. Install motherboard driver and reboot system.
4. Open AMD VISION Engine Control Center> Performance> AMD Radeon Dual Graphics.
Enable AMD Radeon Dual Graphics then press [Apply] button.

5. Check Device Manager to make sure Dual Graphics is enabled.

How to make SSD to run at best performance on TA990FXE motherboard?

1. Complete format the SSD, do not only use quick format.

2. Use SATA AHCI mode to install Operating System. BIOS default use Native IDE mode will not enhance the best performance for SATA3 speed.

3. SSD most not use as boot disk during performance test.

Will A68I-350 DELUXE support Smartfan function?

Yes, A68I-350 DELUXE will support Smartfan function by BIOS default setting.

Will my motherboard be able to support SATA 3TB hard disk?

Biostar motherboard with UEFI BIOS will be able to support SATA 3TB hard disk.

Here are the list for the motherboard with UEFI BIOS.

Intel: Socket 1150/1155/2011

AMD: Socket AM3+/FM1/FM2/FM2+

How to enable the SATA 5 port for RAID array on TA970XE motherboard?

Go to BIOS SATA setting and set SATA IDE Combined Mode to "Disable". SATA 5 port will be able to support in RAID mode.

Q10

How to set up Smart Fan function on my TZ77A motherboard?

1. If you have an Intel boxed fan, then it already has built-in smartfan function. There will be no need for the Intel boxed fan.

2. Please be sure to use 4 pin CPU fan which will allow Smart Fan to control. 3 pin CPU will not be able to support for Smart Fan function.

3. After boot up, press Delete key in POST screen to go to CMOS.

Then go to Advanced> Smart Fan Control.

4. Select CPU Smart Fan to "Auto" for default Smart Fan control.

5. If need precise Smart Fan control, please select CPU Fan Calibration.

It will run a test for the CPU fan for a minute, then show out the Suggest Value for Start Value and Sensitive. Type in these two values then press F4 key to save the BIOS setting. Smart Fan will work at best setting for the system.