Biostar

The maximum memory frequency supported can vary depending on the specific CPU model and memory configuration.

Refer to the tables below for the maximum DDR5 speeds supported under different setups:

For 12th Gen Alder Lake-S processors

For 13th Gen Raptor Lake-S processors

For 14th Gen Raptor Lake-S Refresh processors

This error occurs because Microsoft Dynamic Lighting and VIVID LED DJ are both trying to control the lighting settings at the same time, causing a conflict. To resolve this issue, please turn off Microsoft Dynamic Lighting first, then you can use VIVID LED DJ.

Steps:

1. Click on the Start menu icon in the taskbar and select Settings.

2. Go to Personalization, then click on Dynamic Lighting.

3. Turn off the toggle for Use Dynamic Lighting on my devices.

​

If the motherboard has LED control functions, Windows 10/11 will automatically install the BIOSTAR MSFT 6K7322 driver, which is recognized as a USB hot-plug device. The BIOSTAR MSFT icon will appear in the system tray (lower right corner).

This icon is associated with the lighting control functionality and it can be safely ignored, as it does not require any user action.

1. Press Delete when the system boots up to enter BIOS.

2. Navigate to Security >Secure boot.

3. Enable Secure boot.

4. Navigate to Key Management.

5. On Intel platform: 

Enable Factory Key Provision.

On AMD platform: 

Select Restore Factory Keys.

> Intel platform

> AMD platform

6. Press "Yes" to prceed with install factory defaults.

7. Then press "No" in the next window.

8. Press F10 save & exit.

How to confirm whether secure boot is on?

1. Enter Windows.

2, Type "system information" in search bar.

3. Open System information.

4. Secure Boot State is On when secure boot is enabled.

According to A520 chipset specification, it doesn’t compatible with Ryzen 2000 series processors.

Please refer to the AMD Socket AM4 Chipset link below.

https://www.amd.com/en/products/processors/chipsets/am4.html

1. Open Realtek HD Audio Manager.

The icon is in the notification area (the lower right of the screen).

 
2. When using AC’97 front panel audio, audio manager will always show there are devices connected to the front panel.

 
3. Click the yellow icon on the upper right of the window. Check the box to Disable front panel jack detection. Then click OK.

If the M.2 SSD device is not detected, please try following methods for troubleshooting.

1. Ensure your M.2 device is working properly on other computers.

2. Reinstall M.2 device. Make sure it is installed properly.

3. Try another M.2 socket, if your motherboard has more than one M.2 sockets.

4. Ensure the device is recognized in BIOS.

a. Press delete when the system boots up to enter BIOS.

b. Go to Advanced >NVMe Configuration

5. Try other M.2 devices from the storage support list.

​Please go to BIOSTAR website to find the storage support list based on your motherboard model.

6. If your M.2 device is in Legacy boot mode, please enable CSM support.

a. Press delete to enter BIOS.

b. Go to Advanced > CSM Configuration / Go to Boot menu

c. Enable CSM support.

d. Press F10 save & exit.
 

Clear CMOS to make sure if the computer can boot up, please follow the step below.

1. Remove AC power line.
2. Set the jumper to “Pin 1-2 short”, you can use a metal object like a screwdriver to touch the
two pins.
3. Wait for five seconds.
4. After clearing the CMOS values, be sure the jumper is “Pin 1-2 open”.
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS

(Please refer  user manual by different model to clear CMOS )

if you still have problems, please contact us via E-support

Reference: Valorant_Restrictions

Preliminary Notes

• If your system does not support TPM 2.0, you can still play on Windows 10 by disabling Virtualization-based Security (VBS)

BIOS Mode: UEFI?

•  System Information
  ​
   

BIOS Configuration

Follow the general steps below, then continue based on whether your motherboard is Intel or AMD.

1. Restart your PC and press the Delete key during startup to enter BIOS.
2. In BIOS, press F3 to load "Optimized Defaults".
3. Proceed with the following settings based on your motherboard type:

For Intel Motherboards: 

• TPM 2.0 Enabled?
  [Advanced Menu] --> [Trusted Computing]
  

• Secure Boot Enabled?
  [Security Menu]
  

• IOMMU Enabled?
   [Chipset Menu] --> [System Agent (SA) Configuration] 

For AMD Motherboards:

• TPM 2.0 Enabled?
  [Advanced Menu] --> [Trusted Computing]
  

• Secure Boot Enabled?
  [Security Menu]
  

• IOMMU Enabled?
  [Chipset Menu] --> [North Bridge] 
  

OS Configuration

1. 請先在映泰 BIOSTAR 的官網上搜尋您的機種 , 並在該機種的 ”下載 ” 頁面選擇日期最新的BIOS版本 .

2. 點選下載鍵後 , 頁面上方將會跳出詢問檔案的下載方式 , 左邊為 BIOS檔案 , 右邊為BIOS壓縮檔案 , 建議直接選擇左邊的 BIOS 檔案進行下載 .

3. 下載 完成後將 BIOS檔案拉至USB隨身碟中 . 請在空白處點選右鍵 , “內容 ”並確認 USB 隨身碟的格式為 ”FAT32 ”.

4. 將 USB 隨身碟連接至要更新的系統上 .

5. 請將電腦開機 , 看到畫面後立即按下 ”Delete”鍵進到BIOS底下,此時畫面將 顯示如下

6. 進到BIOS底下後 , 請再按下F12進入更新BIOS的頁面 ”BIOS-FLASHER Utility” . 此時下圖的 ”fs0 ”為偵測到的 USB 裝置 , 若連接多個 USB 隨身碟 或硬碟, 則會出現數個可選擇裝置 ”fs1”, “fs2 ”以此類推 , 請確認正確隨身碟,並按下 ”Enter ” 將其開啟 .

7. 此時將會出現剛拉至 USB 隨身碟中的BIOS檔

8. 再次按下 ”Enter”,系統將會詢問是否更新此 BIOS 檔案 ,請按下”Y”鍵.

9.BIOS更新中 , 請勿關掉電源或執行其他動作.

10. 更新完成後 , 此時畫面如下 , 請按下 ”Y”進行重啟 . 重新啟動後 , 請再次按下 ”Delete” 鍵進到BIOS底下 .

11. 確認BIOS版本更新成功後,在進到 Windows之前 , 必須進行系統優化設定 請按下 ”F3 ”, 選擇 ”Yes”來進行優化設定 .

12. 再按 ”F10”, 一樣選擇 ”Yes ”後, 系統將會儲存並離開 .

13. 此時更新已經完成 , 可正常進行使用 .